Discount Car Stereo iP2D-BKR 빠른 시작 설치 매뉴얼 - 페이지 4

{카테고리_이름} Discount Car Stereo iP2D-BKR에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo iP2D-BKR 9 페이지. Music streaming module for becker radios with aux menu option
Discount Car Stereo iP2D-BKR에 대해서도 마찬가지입니다: 빠른 시작 설치 매뉴얼 (10 페이지)

페이지 인쇄

Fig. 7

10. Connect dock cable 8-pin mini-din plug to module 8-pin connector (See

Fig. 8).

11. Route 30-pin dock (See Fig. 9) to desired mounting location on

dashboard, glove box, console etc. within 12 ft. of radio. Use caution to

not cut, pinch or crimp the cable during this step.

Fig. 8

Module 8-pin mini-DIN connector

Fig. 9

12. Secure adapter box and proceed to next section.

Operation:

One of the most important steps in this process is enabling the Becker Radio

AUX Menu option. Most Becker radios are pre-programmed to recognize a CD

Changer connection and because of that you must perform the following steps

and change the setting to "AUX" otherwise the radio will not recognize the newly

installed adapter.

Enabling the AUX function

Radios with TP button: (i.e. CDR-220)

Turn radio "ON"

2. Press and hold the "TP" button for about 8 seconds until Becker 1 is

displayed.

3. Turn the Tuning Knob until AUX OFF is displayed.

4. Press either button located directly under the Arrows on the display to

change the present setting from OFF to ON.

Turn radio OFF.

5. Turn Radio back ON, press the "S" (Source) button to enter AUX Mode.

This is the mode to use whenever you want to listen to the device

connected to the adapter.