Discount Car Stereo A2DIY-CHRY 설치 매뉴얼 - 페이지 3

{카테고리_이름} Discount Car Stereo A2DIY-CHRY에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-CHRY 5 페이지. For 1995-02chryler radios with cd changer controls

페이지 인쇄

4. Route microphone plug/cable (10 ft. long) down side pillar, under steering

column and into radio cavity,

5. Connect microphone plut to module "MIC" input. (See Fig. 4)

Wind noise (Convertibles) will negatively affect phone audio. Users are

advised to install microphone away from wind/ventilation ducts etc.

Visor microphone

Fig. 3

Fig. 4

Module

Pairing

The pairing process varies between devices but the basic steps are the same.

This process is done upon initial install and will not have to be repeated

Turn Ignition and radio "ON"

Adapter LED will flash (pairing mode)

Settings, Wireless & Networks, Bluetooth

2. On A2DP device: Go to

Settings

Bluetooth

3. Select

and turn on.

4. Then select Bluetooth settings

Scan for devices

5. Tap

6. Wait for the Bluetooth device name to appear and select it. (See below)

Adapter LED will glow steady

Notes:

New!

On incoming calls, ring tone and call number announced on car speaker.

Additional tone (static) heard during call number announcement is normal

2. On some Chrysler radios (dependent on software version); the SEEK button

can be used to change tracks, answer/reject calls.

3. *Media remote does not control Chrysler radio functions.