Cub Cadet chl 500 매뉴얼 - 페이지 7

{카테고리_이름} Cub Cadet chl 500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet chl 500 12 페이지. Mower lift

ASSEMBLY AND OPERATING INSTRUCTIONS

STEP 3

Attach the Safety Straps to the

wheel pads.

Insert the strap loop through the

wheel pad around the smaller wheel

pad tube. Thread strap hook and

buckle through the strap loop and

pull until tight. Repeat with the other

Safety Strap and wheel pad.

STEP 4

Reverse Front Tires of ZTR Mower (optional – if not applicable,

skip to Step 5)

In some cases, the mower deck or anti-scalping wheels will hit the

Lift Arm while the mower is being raised. This is often the case if

part of the deck (including the anti-scalping wheels) protrudes past

the center line of the front wheels of the mower. If this happens:

• Rotate the front tires 180° so that they are in the reverse position.

• Slide the lift as close to the wheels as possible.

STEP 5

Move the mower onto the Wheel Pads.

Wheel Pads must be properly aligned with

the mower's front tires (see Step 2) and

secured with Push Pins.

NOTE: Wheel pads will accommodate

10" -17" tire sizes.

Jack MUST be on a hard solid level surface.

NOTE: If the lift slides when moving the

mower onto the Wheel Pads, place Wheel

Chocks behind the lift's wheels to

prevent it from sliding.

Forward

Wheel

Position

Reverse

Wheel

Position