Discount Equipment SS-18 운영자 매뉴얼 - 페이지 4

{카테고리_이름} Discount Equipment SS-18에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Equipment SS-18 9 페이지.

페이지 인쇄

E-ss.16/! B•IE-2/98

SS-16/18 SAFETY INSTRUCTIONS

[WARNING]

Read and understand these instructions completely

before starting or using machine.

MACHINE PRECAUTIONS

Wear appropriate clothing, footwear, and safety attire

when operating this machinery. Do not wear loose

clothing that can get tangled in moving parts. Steel toe

safety shoes, padded gloves and

( \

safety glasses should be worn.

~ ~

~-···0~

Eye and ear protection must be worn at all times when

the machine is in use. During normal operation, sound

levels exceed 92 dB(A).

Wear an approved dusUparticle respirator when

removing hazardous material or when sawing dry.

Maintain a safe operating di~tance to other personnel.

Maintain a safe operating distance from flammable

materials. Sparks from the cutting-action of this saw

can ignite flammable materials or vapors.

Obtain the engine manual. Read it and understand it

before continuing. Follow the engine manual for

break-in instructions.

This concrete

asphalt saw is designed to cut flat,

horizontal concrete or asphalt slabs using diamond

saw blades. It is controlled by a single operator from a

position at the rear of the saw.

Read and follow all safety labels.

Avoid deck inserts, pipes, columns, ope,nings,

electrical outlets, or any objects protruding from slab

surface.

10. Stay alert; use common sense, and avoid unsafe

conditions.

Specifications

WEIGHT

(approximate - may vary depending on options)

SS-16 ..................... .460 lbs (209 kg)

SS-18 ...................... 475 lbs (216 kg)

BLADE DIAMETER (maximum)

SS-16 ...................... 16 in. (40.64 cm)

SS-18 ...................... 18 in. (45.72 cm)

ARBOR SHAFT

SS-16 & SS-18 ........ 1 in. diameter (2.54 cm)

ARBOR SPEED (maximum)

SS-16 ...................... 3600 RPM

SS-18 ...................... 2800 RPM

OWNER RESPONSIBILITIES:

Provide all instruction manuals for the operator to fully

read and understand.

Provide proper training and instruction to the

operator.

Maintain safety decals on the machine.

Maintain the machine in safe operating condition with

all guards securely in place, all mechanical fasteners

tight, all controls in working orde~. and the saw

configured for the job application.

Maintain a copy of the saw operators manual and

engine manual with the machine for reference at all

times.

Never allow anyone to operate the saw in an impaired

physical or mental state.

OPERA TOR RESPONSIBILITIES:

Be familiar with all aspects of the machine's operation

and controls before starting the engine/motor.

Use the correct blade for the job including rated RPM,

diameter and proper mounting size configuration.

Never operate the saw while under the influence of

drugs or alcohol, while taking medications that impair

the senses or reactions, or when excessively tired or

under stress.

Follow the instructions in the operators manual and

exercise caution.

Never leave the machine running unattended.

Comply with local safety and health regulations such

as ANSI B7 .1 and OSHA regulations.

Maintenance Schedule

Follow Engine Manual Maintenance Schedule

After First 4 Hours:

• Tension Belts

As Required Thereafter:

• Tension Belts

Before Operation:

• Visually Inspect entire

machine

, Check engine oil

• Inspect drive belts

, Inspect blade

, Inspect arbor shaft

• Inspect

drive

chains

Every 4 Hours:

• Grease Bearings

Daily:

, Clean

oil the air filter

(If engine· intake shows

signs that dust has

passed through the air

filter, change engine oil.)

• Clean dust

dirt off

machine

Weekly:

• Lubricate

Drive

Chains

Every 50 Hours of Operation:

• Check

transmission level

• Change engine oil

filter

(sooner if necessary)