Blagdon 7000 매뉴얼 - 페이지 13
{카테고리_이름} Blagdon 7000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blagdon 7000 20 페이지. Clean pond machine
페이지 인쇄
MAINTENANCE & CLEANING
To clean your Blagdon Clean Pond Machine, follow these simple steps:
1
Turn outlet valve
to waste.
IN
FROM
POND
4
Turn outlet valve
to pond.
INLET & OULET &
WASTE CLOSED
NOTE: A maximum of 10 Clean Pond Pods can be fitted into the dosing chamber at any one
time, this is sufficient for a pond with a volume of 5000L. If a higher amount is needed, the
dose should be split in half and dosed over subsequent days to allow the pods time to dissolve.
If Clean Pond Pods are being dosed at the same time as a filter clean, return the flow back
to the pond before closing the dosing chamber lid – else the action of cleaning will wash the
contents of the pod away as waste.
NOTE: If you are not dosing Clean Pond Pods or you are cleaning the filter as part of a
water change you do not need to remove the dosing chamber cap, simply return the flow
diverter valve back to the filter outlet once the water runs clear or you have drained the
desired amount of water from the pond.
2
Rotate handle
to clean.
WASTE
OUT TO
GARDEN
IN
FROM
POND
5
Replace and rotate
dosing chamber cap.
IN
FROM
POND
3
Rotate Pod dosing
chamber cap & remove.
Insert Clean Pond Pod.
WASTE
OUT TO
GARDEN
INLET & OULET &
WASTE CLOSED
OUT TO
POND
11