Cub Cadet 394 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Cub Cadet 394에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet 394 20 페이지. 50" mower deck for series 3000 tractors
Cub Cadet 394에 대해서도 마찬가지입니다: 운영자 매뉴얼 (16 페이지)

페이지 인쇄

SECTION I. TRACTOR AND DECK PREPARATION

A. DECK PREPARATION

WARNING

When handling the mower deck, be careful not

to cut yourself on the sharp blades.

Remove the top and break down the sides of the crate

to remove the deck assembly from the shipping

CHUTE

DEFLECTOR

B. TRACTOR PREPARATION

The mower deck front lift bracket/rod assembly is

shipped on the tractor. If not already done, cut the tie

strap securing the front lift bracket/rod assembly to the

front of the tractor frame. Pull the center of the tractor's

quick latch rod downward to remove the lift bracket/rod

assembly from the tractor. See Figure 2.

container. Cut the tie strap securing the front drive shaft

to the deck assembly. Remove all padding material from

the drive shafts. Refer to Figure 1.

Never operate the mower deck without the chute

deflector installed and in the down position.

DECK ASSEMBLY

Figure 1

WARNING

REAR DRIVE

SHAFT

FRONT DRIVE

SHAFT

QUICK LATCH ROD

FRONT LIFT ROD

Figure 2