DiscountRamps BLACK ICE SMDOLLY 사용 설명서 - 페이지 3

{카테고리_이름} DiscountRamps BLACK ICE SMDOLLY에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DiscountRamps BLACK ICE SMDOLLY 6 페이지. Aluminum scooter & wheelchair carrier

페이지 인쇄

Assembly

Step 1. Attach the support plates

(E, F, G, H) to the carrier base (A)

using M5x12 bolts and lock nuts

(K). Do not fully tighten yet. Make

sure the reflector supports are both

towards the front of the carrier.

Step 2. Attach the top frame (B) to the support plates using M5x12 bolts and lock nuts (K). After all

bolts and nuts are loosely secured, go back and securely tighten the hardware with a Phillips screw-

driver and M8 wrench.

(2a)

Step 3. Carefully flip the assembly upside-down. Attach the hitch tube (D) to the basket assembly us-

ing the M6x45 bolts, washers, and nuts (J). Tighten securely with a 4mm hex key and 10mm wrench.

Make sure the hitch tube is pointing towards the back of the carrier (opposite side of reflectors).

(3a)

(1)

(3b)

(2b)

Page 3