DiscountRamps NDALR 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} DiscountRamps NDALR에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DiscountRamps NDALR 9 페이지. 250lbs aluminum truck rack

Fig 5

M12*60 hexagon bolt 6x

Parallel support frame 2x

Supporting arm 2x

The purpose of part four is to attach the support arms and their rails to the rack. Follow the steps

below:

To attach the support arms and their rails, you will need 2 "Supporting Arm", 2 "Parallel

Support Frame", 6 "M12*60 Hexagon Bolts", and 6 "M12 Locknut" to attach Ladder

Stop .

First, attach both the "Supporting Arm" and "Parallel Support Frame" to the post. Using

the "M12*60 Hexagon Bolts, attach the "Supporting Arm" by sliding the "Parallel

Support Frame" parallel with hole on the post and inserting the bolt. Tighten the "M12

Lock Nut" enough to attach Ladder Stop so that the frame will not fall.

Repeat the previous step, only for the "Supporting Arm, which should be lower than

the frame.

Slide the tabs from the free end of the "Supporting Arm" so that the tabs' holes and the

holes from the "Parallel Support Frame" are parallel. Attach them together using the

same method from step 2.

Tighten all of the locknuts and repeat this process on the additional post.

Part 4

M12 locknut 6x

Ladder stop 1x

Part 4