Arnica Puf XL 사용 설명서 - 페이지 6
{카테고리_이름} Arnica Puf XL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arnica Puf XL 12 페이지.
페이지 인쇄 INSTRUCTIONS FOR USE
As you use your iron, you will see that you have made such a right choice. Our
goal is to give you
more than you pay. We thank you for choosing our product. If you read these
instructions and use
your iron as specified in them, you will see that everything is such simple.
Thus, you may obtain the
maximum performance from your iron. Enjoy it.
CONTENTS
A. Safety Rules
B. Device Overview
C. Technical Specifications
D. Use
E. Cleaning and Maintenance
A.SAFETY RULES
While using electrical devices, the following safety precautions must be
regarded. Keep this
information for the uses in future.
Read the instructions for use carefully.
Before using your iron, check whether the power and voltage of your iron
correspond to your
electric supply system. If not, don't use your iron and consult to the site you
have bought from.
Never leave your iron uncontrolled while it is in operating condition.
Unless a supervision and control is ensured by a person responsible for the
safety of the
devices regarding the use of the device, this device is not aimed to be used by
handicapped
persons in physical, emotional and mental abilities (including children) or by
the persons
with the lack of experience and knowledge.
The children must be held under supervision in order to assure that they
don't play with the
device.
If the feeder cord becomes damaged, this cord must be replaced by its
manufacturer or the
manufacturer's service agent or a staff having the same competency to avoid
any danger.
In case of a use close to the children, maximum attention must be shown
and the iron must be
kept out of reach of children.
Before cleaning the iron, it must be unplugged.
While plugging or unplugging your iron, it must necessarily be at "min" off
position.
If the cable of your iron becomes damaged, if you have dropped the iron or
a visible damage
has occurred, if the iron leaks water out, never use it and take to the nearest
Arnica Authorized
Service.
In order to avoid electric shock; don't immerse the cable, plug and iron in
water or in any
liquid.
Clean your iron with a moist cloth.
Take care of the cable not to hang down from the edge of your table or
bench or not to
contact another device.
After finishing the ironing operation, set the steam control button at 0
position, place the iron
vertically on its heel and unplug when you clean the device, fill or empty the
water tank, break
for ironing even for a short time.
When you use your iron or while cleaning, unplug it and be sure that it has
cooled well before
cleaning.
After finishing with the iron, let it cool down and after it cools completely,
put it away.
Don't operate the iron within reach of an oven or cooker etc that is
operating and absorbing
high electricity.
While filling or emptying the water tank of the iron, unplug it necessarily.
In order to avoid injuries, don't touch the hot surfaces of your iron and be
careful while turning
it upside down, hot water may have remained in it.
If the indicator light doesn't go out, namely, it permanently continues to be
on or if it is off, a
malfunction may have occurred in your iron. In such a case, don't use your
iron and take it to
the nearest Arnica Authorized Service.
For repair and spare parts, resort to the nearest Arnica Authorized Service.
Only use original parts and accessories in your iron. You may supply these
parts and
accessories from the nearest Arnica Authorized Service.
Always place the iron on a stable, smooth and horizontal surface.
Never touch the hot surfaces while your iron is operating.
Electromagnetic fields (EMF): This Arnica device complies with all
standards concerning
electromagnetic fields (EMF). When used properly and in accordance with the
instructions in
this manual, the use of device is safe according to its scientific data today.
WARNING: The device you have bought is household type. Don't use for
commercial purposes and
in places of business.
During the first operation, don't start at (max) setting. Your iron will be back
to normal at (**)
setting and after the second warning of the temperature light, move the steam
control button to
steam position from 0 position, you may start to iron when steam comes out.
In the first operation, white cuttings may come out of your iron, they are
harmless. Clean them by
pushing the shock steam button before starting to iron.
B.DEVICE OVERVIEW (Figure 1)
1. Spray Button
2. Water Filling Inlet
3. Steam Control Button
0 = dry ironing
= ironing in less steam
= ironing in much steam
= de-scale cleaning mode
4. Shock steam Button
5. Temperature light
6. Electric cable
7. Type plate
8. Water tank
9. Temperature control button
10. Iron Soleplate (Puff Puff Plus Model Has Ceramic Soleplate)
C.TECHNICAL SPECIFICATIONS
Trademark : ARNICA
Model : Puff Puff-Puff Puff XL-Puff Puff Plus
Voltage : 220-240V~
Frequency :50-60Hz
Power :2000W
Physical Life : 7 years
D.USE
It is normal for your iron to omit fume and exhalation in the first use. The
6