DiscountRamps TD-600 지침 - 페이지 3

{카테고리_이름} DiscountRamps TD-600에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DiscountRamps TD-600 4 페이지. Trailer dolly

Step 2. Connect the two wheels (H) to the axle (G) using the axle washers (J) and cotter pins (I).

(2a)

(2b)

Step 3. Insert the tow bar (E) into the bracket on the base frame (A), using the end with one hole.

Align the leg (B) with the holes on the tow bar (E), positioning the short end towards the bottom. Se-

cure the three components together using the M10x65 bolt (N), washer (P), and lock nut (Q).

It may be helpful to loosely tighten bolts until the dolly is fully assembled, then securely tighten all bolts.

(3a)

(3b)

(3c)

(4)

Step 4. Align the brace (C) with the holes on the

tow bar (E) and base frame (A). Secure the brace

bolt (O), washer (P), and lock nut (Q).

(5)

Step 5. Insert the tow ball (K) into the holes in the

brace (C) and base frame (A), the secure with the

lock washer (L) and nut (M).

Rev. 061518

Page 3

DiscountRamps.com • 1-888-651-3431