DISCOVER 12-36-6700 설치 매뉴얼 - 페이지 4

{카테고리_이름} DISCOVER 12-36-6700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER 12-36-6700 6 페이지. For motive power applications
DISCOVER 12-36-6700에 대해서도 마찬가지입니다: 운영 매뉴얼 (13 페이지), 운영 매뉴얼 (14 페이지)

페이지 인쇄

2.2 Wall Mount Overview

Each battery requires a seperate bracket. Attach the bracket to the wall before attaching the AES battery to the wall mount.

Each bracket requires a minimum of four 1/4 inch diameter lag bolts or other fasteners. Fasteners must be strong enough to

support 227 kg (500 lbs).

Mounting Surface

Wood Studs 16 inch on-center

Wood studs not 16 inch on-center

(3/4 inch min. plywood panel required)

Steel studs at 16 inch on-center (min. 18 gauge)

1/4 nch Diameter x 3 1/2 inch long lag bolt

1/4 inch diameter x 1 inch long wood screw

1/4 inch diameter self-drilling screw

4.25in

18.72in

4.25in

If the wall does not have 16 inch on-center studs, adequate

support for the bracket will have to be provided. For example, a

sheet of plywood can be attached to the wall, and the bracket can

then be attached to the plywood.

Minimum Required Fastener

16in

12in

17.18in

▲

NOTE

Minimum Number of

Fasteners Per Wall Mount

3.19in

1.77in

discoverbattery.com