DISCOVER 14-24-2800 운영 매뉴얼 - 페이지 5

{카테고리_이름} DISCOVER 14-24-2800에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER 14-24-2800 14 페이지. For motive power applications
DISCOVER 14-24-2800에 대해서도 마찬가지입니다: 운영 매뉴얼 (13 페이지)

페이지 인쇄

3. Design Features & Components

3.1 Integrated Battery Management System (BMS)

Monitors

• Cell module voltage

• Battery voltage

• Battery current

• Battery temperature

• Battery state of charge (SOC)

• Battery energy throughput

Module Balancing

• Performs balancing of cell modules

Protection and Operating Limits

• BMS will open its internal relay when maximum operating limits are exceeded

• When the condition returns to its nominal operating range, most protections will be released and reset after 120s

Communication Ports

• Isolated USB and CAN communication

Data Logging

• Logged data is accessed using AES Dashboard software via the USB port

3.2 Internal Battery Fuse

The internal battery fuse provides back-up over-current protection. External fusing should be sized correctly to protect the circuit

and circuit cabling.

•

A blown fuse requires replacement by a qualified installer - contact your Discover Battery installer.

3.3 Protections

The BMS will open the internal relay to protect against operation outside of maximum specifications. During a protection the

key LED will flash at 1 Hz (Hardware version 0.0.0.1 models will sound a buzzer, but not flash the key LED). Most protections will

automatically recover once the condition is cleared with the exception of the low voltage protection.

Protection

Over Voltage

Under Voltage

High Current

High Temperature

Low Temperature

4. Handling

• Battery should be set to OFF

• Battery cables should be disconnected

• Battery terminals should be protected

• Battery handle should be used to lift battery

• Battery should be handled by two people or mechanical lift equipment

• Do not lift or carry the battery during usage or operation

Auto Recoverable

Protection is triggered when any cell module voltage exceeds the

Yes

threshold value for 5 seconds. After the voltage falls below the

trigger for 120 seconds the protection is cleared.

Protection is triggered when any cell module voltage falls below the

threshold value for 5 seconds. The battery will turn itself off after 120s.

Protection is triggered when current exceeds the threshold value. The

Yes

protection will be cleared after 120 seconds.

Protection is triggered when the battery temperature exceeds the

Yes

threshold value for 5 seconds. After the temperature falls below the

recovery temperature the protection is cleared.

Protection is triggered when the battery temperature falls below the

Yes

threshold value for 5 seconds. After the temperature raises above the

recovery temperature the protection is cleared.

▲ WARNING!

Read Safety Section before installing the battery.

(Win64

supported)

Description

discoverbattery.com