3D AEROWORKS Pilatus PC-21 조립 설명서 및 사용자 설명서 - 페이지 2

{카테고리_이름} 3D AEROWORKS Pilatus PC-21에 대한 조립 설명서 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D AEROWORKS Pilatus PC-21 19 페이지.

3D AEROWORKS Pilatus PC-21 조립 설명서 및 사용자 설명서
OVERVIEW:
This replica of the Pilatus PC-21 is designed for quick and easy construction and printed
using light-weight PLA (LW-PLA). For best results the canopy should be printed with clear
PLA, and the motor mount and propeller assembly in regular PLA or PETG. A semi scale
propeller and hub is included in the plans designed to suit the 2804 2300kv outrunner (7x5)
in 2 blade configuration. Utilising full 4 channel controls; aileron, elevator, rudder and throttle,
this model performs extremely well given its small size and lightweight. Links to components
used can be found on the last page of the user guide.
This model has taken many hours of hard work and testing in order to provide a nice flying
aircraft. Please do not share it. Please show your appreciation by directing interested parties
to the link below.
https://cults3d.com/en/3d-model/various/pilatus-pc-21-600mm
GENERAL SPECIFICATIONS
WINGSPAN:
PRINT WEIGHT:
FLYING WEIGHT:
ELECTRICS
MOTOR:
ESC:
SERVOS:
BATTERY:
INCLUDED
STL FILES OF ALL COMPONENTS
FACTORY FILES FOR SIMPLIFY 3D FOR PRINTERS:
600mm
205g
340g
2804 2300KV
10amp (min) 20amp (recommended)
3.7g MICRO
950MAH 2S (or similar)
200X200X200