DISCOVER LYNK Edge Card Victron 사용자 설명서 - 페이지 8

{카테고리_이름} DISCOVER LYNK Edge Card Victron에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER LYNK Edge Card Victron 9 페이지. Lithium ion battery

Using the CCGX navigate from the Device List > Settings > Services > Can-bus Profile and select VE.Can & CAN-bus BMS (250

kbit/s).

Return to the Device List and the CCGX should display Discover AES as one of the devices along with the battery SoC, Voltage

and Amps. If you have multiple batteries a single entry will show up, which represents all batteries.

•

If Discover does not appear on the Device List, confirm that the CAT5

communication cable is a normal patch type and not a cross over type.

Use manufactured cables to avoid bad crimps and reduce the risk of a poor

connection.

The parameters option within the battery page shows the actual battery charge limits. If you have multiple batteries a single

entry will show up, which represents all batteries.

•

Battery Low Voltage value displayed is the BMS value, the actual discharge

voltage limit is governed by the DC input low shut-down setting.

▲ NOTE

discoverbattery.com