DISCOVER Adapt 30 사용자 설명서 - 페이지 14

{카테고리_이름} DISCOVER Adapt 30에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER Adapt 30 17 페이지.
DISCOVER Adapt 30에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지)

Trouble Shooting

1. Cannot hear a dial tone.

• Check the PC/TEL button. TEL Mute: PC/TEL indicator – 'OFF'

• Please check the cable connection between base unit and phone.

• Check that the power adapter is plugged in and has power

• Please check the compatibility switch. Adjust compatibility switch until you can hear the dial

tone.

2. Microphone volume (TX) is low / dead.

• Make sure that the microphone (TX) mute function is deactivated.

• Check the position of the boom arm and make sure that the microphone is placed as close

as possible to your mouth (approx. 2 fingers distance).

• Adjust the microphone (TX) volume on the bottom of base unit.

3. Buzzing sound on the headset

• Telephone may not be fully immune to the radio transmission between your headset and

base unit. To overcome this problem, move the base unit to at least 30 cm/12" away from

the phone.

4. Headset echoes

• Adjust the telephone's volume. If necessary, adjust your microphone volume on the headset

to a lower setting.

5. EHS doesn't work with the telephone

• Make sure the telephone is compatible with the wireless headset. Refer to the EHS guide.

6. Headset was working, but it has stopped.

• Headset may need pairing to the base unit again. Refer to the 'Operating Instructions'

• Headset battery may be dead. Return the headset to the cradle on the base unit for

charging.

For more information, please contact: Discoverheadsets.com and share the following

information:

- Your name

- Your phone number

- Your email address

- Phone number

- Region

- Fault with product

- Barcode serial number (found on the bottom of the base unit)

We will endeavour to respond to you within the next full working day.