DISCOVER 950-0025 사용자 설명서 - 페이지 17

{카테고리_이름} DISCOVER 950-0025에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER 950-0025 18 페이지. Sma sunny island

3. Set the following parameters for Discover Lithium batteries:

• Battery Type: Lithium-ion (Li-Ion)

• Nominal capacity of the battery: Installed number of batteries x their nominal

capacity in Ah

SUNNY ISLAND 6.0H

Home

Battery conﬁguration

Type

Lithium-ion (Li-ion)

Back

• Nominal voltage for the battery is automatically set to 48 V.

• Only mandatory values for the basic operation of the Sunny Island system are

available for set up in the QCG.

7.4 LYNK II and Sunny Island Communication

The LYNK II Communication Gateway provides power conversion and monitoring

devices with BMS real-time data in a closed-loop configuration to optimize control

over the charging process in solar applications. LYNK II also enables the remote

monitoring of Discover Lithium battery SOC and data logging of multiple sites using

the data monitoring services offered by off-grid inverter systems.

If communication is interrupted between the LYNK II and power conversion device,

after about 1 minute the power conversion device throws a fault (952).

Once communication is re-established, the operations of the power conversion

device and the LYNK II communication gateway resume.

Minimum capacity

1000

Figure 8. Battery Configuration in WebConnect

Send Next

NOTE

User Information

Battery Conﬁguration