Cub Cadet Commercial 55AE230R750 운영자 및 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Cub Cadet Commercial 55AE230R750에 대한 운영자 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet Commercial 55AE230R750 16 페이지. Walk-behind commercial rotary mowers
페이지 인쇄
8. TO ADJUST THE LITE-TOUCH (MANUALLY)
a.rThree holes in the belt guard allow you to
reposition the hex cap screw to adjust the brake
lever. The top hole (lite tension), the middle hole
(medium tension) and the lower hole (hard
tension). The unit is shipped with the hex screw in
the top hole. SEE THE FIGURE BELOW FOR
REFERENCE. To adjust the bolt do the following:
b.With a spring puller, pull the spring and detach it
from the hex cap screw.
c.Remove the lock nut from the lite touch hole in
the belt guard.
d.Loosen (but do not remove) the remaining two
nuts on the belt guard.
e.Pull the belt guard away from the unit. This will
give clearance to remove the bolt. Note: If you are
having difficulty removing the bolt, continue to
loosen the two nuts on the belt guard (BUT DO
NOT REMOVE). Remove the bolt and nut.
f.Reposition the bolt and nut into the middle or
lower hole and retighten all three nuts.
g.Using a spring puller, reattach the spring to the
hex cap screw.
Belt Guard
Loosen remaining two nuts (DO NOT REMOVE)
Figure 11
Lite
Medium
Hard
13