ARNOLD MCU 400 D 매뉴얼 - 페이지 5
{카테고리_이름} ARNOLD MCU 400 D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARNOLD MCU 400 D 20 페이지. Mirrorball motorcontroller
페이지 인쇄Mirrorball Motorcontroller
Operating Determinations
●
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●
To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
●
The maximum ambient temperature t
●
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
●
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
●
If the mirror ball or motor (60450) is lowered from the ceiling or high joists, professional trussing systems
have to be used.
●
The Mirrorball Motorcontroller must never be fixed swinging freely in the room.
●
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
a safety cable.
●
Make sure that the installation area can hold a minimum point load of 10 times the device's load
(e.g. maximum load: 3 kg = point load: 30 kg).
●
When rigging, derigging or servicing the device, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Improper installation can cause serious injuries and/or damage of property!
Ordercode: 60455
= 40 °C must never be exceeded.
a
4