DISCOVER P02S 사용 설명서 및 작동 지침 - 페이지 17

{카테고리_이름} DISCOVER P02S에 대한 사용 설명서 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER P02S 20 페이지.

6. Press (short-press) the Play / Pause button to play or pause the music.

7. Press (long-press, about 3 seconds) the Play / Pause button to activate SIRI / Google Assistant voice

assistants.

8. To deactivate the currently established Bluetooth connection, press (long-press, about 3 seconds) the

TWS button.

Notes :

- In Bluetooth mode, if there is an incoming call, you can accept the call by pressing (short-press) the Play

/ Pause button or reject the call by pressing (long-press, about 3 seconds) the Play / Pause button. During

the call, to hang up press (short-press) the Play / Pause button. During the call, press (long-press, about 3

seconds) the Play / Pause button to switch the call from the speaker to your phone.

TWS FUNCTION (pair 2 identical speakers)

1. Switch on 2 identical speakers, in Bluetooth mode on the 2 speakers. Pairing is done using only one of the

speakers.

2. Press (short-press) the TWS button, the speaker will emit a sound and start synchronization. When syn-

chronization is completed, the speaker plays a new sound.

3. Establish the Bluetooth connection with your phone.

4. To stop the TWS function, press (short-press) the TWS button.

Notes :

- When 2 speakers are connected by TWS, synchronization will be done automatically during the next use.

- If your phone is connected via Bluetooth, TWS synchronization cannot be performed. Deactivate the estab-

lished Bluetooth connection to start TWS synchronization, then reconnect your phone.

- To simultaneously deactivate the TWS function and the currently established Bluetooth connection, press

(long-press, about 3 seconds) on the TWS button.

USB OUTPUT

Use the USB 5V 1A output to recharge a mobile phone or any compatible device (speaker must be on).

MODE EQ

This appliance offers 2 kinds of sound effect, press (short-press) EQ button to change the EQ modes.

AUX INPUT

Using the included auxiliary cable, connect it to the auxiliary input on the speaker and to your device (mp3

player, etc.). The device automatically switches to AUX mode.

MULTI-COLORS LED LIGHT FUNCTION

The speaker is in multi-colors light mode when powered on. You can press (short-press) the multi-colors Light

button to turn the light off and on.

RESET

If the speaker does not turn off or respond, you can short-press the Reset jack with a small round pin to reset

the speaker.

7. CLEANING AND MAINTENANCE

WARNING : Before cleaning your appliance, carefully read the safety instructions in this manual.

We recommend that you keep your unit clean and clean it at least once a month.