DISCOVER 950-0019 설치 매뉴얼 - 페이지 4

{카테고리_이름} DISCOVER 950-0019에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCOVER 950-0019 6 페이지. Wall mount bracket for aes battery
DISCOVER 950-0019에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지)

페이지 인쇄

2.2 Wall Mount Overview

Each battery requires a separate bracket. Attach the bracket to the wall before attaching the AES battery to the wall mount.

Each bracket requires a minimum of four 1/4 inch diameter lag bolts or other fasteners. Fasteners must be strong enough to

support 227 kg (500 lbs).

Mounting Surface

Wood Studs 16 inch on-center

Wood studs not 16 inch on-center

(3/4 inch min. plywood panel required)

Steel studs at 16 inch on-center (min. 18 gauge)

4.25in

18.72in

4.25in

950-0019 AES Wall Mount

Bracket for AES 42-48-6650

+ 1.778.776.3288

[email protected]

1/4 inch Diameter x 3 1/2 inch long lag bolt

1/4 inch diameter x 1 inch long wood screw

1/4 inch diameter self-drilling screw

16in

12in

3.19in

17.18in

If the wall does not have 16 inch on-center studs, adequate

support for the bracket will have to be provided. For example, a

sheet of plywood can be attached to the wall, and the bracket can

then be attached to the plywood.

#7 -13511 Crestwood Place, Richmond, BC, V6V 2E9, Canada

discoverlithium.com

Minimum Required Fastener

1.77in

▲

NOTE

Minimum Number of

Fasteners Per Wall Mount

17.18

950-0023 AES Wall Mount

Bracket for AES 44-48-3000