Blake UK PROAPE900 설정 매뉴얼 - 페이지 10
{카테고리_이름} Blake UK PROAPE900에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blake UK PROAPE900 13 페이지. 24v outdoor cpe
페이지 인쇄CPE The Bridge
24v "The Bridge" 900Mbps 11ac 5G High Power Outdoor CPE.
1.
The CPE are supplied with Jubilee clip for pole mounting but can be wall mounted
with the two screw mounting holes.
2.
Power the CPE with a 24v 1A POE Power supply. (PROAPPSU11)
3.
Roughly align the CPE and power up.
4.
Press the F button and select C (Client) on one CPE display and H (Host) on the other.
The display will flash to show confirmation on saved information.
Ensure that they are on the same ETSI channel.
5.
Press S button to show the last 3 digits of the IP (eg A253 would be 192.168.188.253)
6.
Press RST button and leave for 1 minute until the slave and host have bonded.
7.
Press the select button until P is displayed.
Align both Host and Slave until the maximum achieved number is displayed.
Transmission angle is 60
maximum.
°
Set-up Guide (24v OUTDOOR CPE)