Blake UK PROCEPTION PROAPW300L 고급 지침 - 페이지 6
{카테고리_이름} Blake UK PROCEPTION PROAPW300L에 대한 고급 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Blake UK PROCEPTION PROAPW300L 15 페이지. In-wall and ceiling high speed access points
Blake UK PROCEPTION PROAPW300L에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지)
페이지 인쇄
PROAPW300L- 300Mbps 2.4GHz In Wall Access Point
with RJ45 Port
PROAPW750L- 750Mbps 2.4 & 5GHz In Wall Access Point
with RJ45 Port
PROAPCEILING- 1200Mbps 2.4 & 5GHz Ceiling Access Point
Advanced Instructions
WAN or LAN.
2G and 5G Wi-Fi:- showing channel allocated.
Flow:- Shows upstream and downstream of current connections.
On the left side is the navigation buttons to other setup areas, as detailed below.
Setup Wizard
The mode the access point will work in:
Gateway mode:- The AP will allocate IP numbers to the connected devices. This
mode is default as it permits you to connect and setup the AP very easily.
The AP could be left in this mode however, any connections to the AP (wireless or
not) will be allocated different IP addresses to the main network, potentially
preventing communication between devices on the main network.
Repeater mode:- The AP will receive & re-transmit the Wi-Fi signal from another
device.
It performs the same role as Access Point mode, but the key is that it talks over Wi-Fi
instead. As such, this does not get around obstacles as well as an access point does.
While an access point can be put in front of an obstacle, a repeater will need to be
angled around it. However, the benefit of repeaters is that they do not need a cable
to connect to the central hub.
www.blake-uk.com
0114 223 5000
PD2011-8246-04