Arnott P-2213 설치 매뉴얼 - 페이지 4
{카테고리_이름} Arnott P-2213에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arnott P-2213 5 페이지. Air suspension compressor
페이지 인쇄
3.
USING THE PLASTIC DRYER PLUGS SUPPLIED WITH THE NEW COMPRESSOR, PLUG THE EXTRA HOLES
IN THE TOP OF THE AIR DRYER.THESE PUSH IN LIKE THE AIR LINE. 4WD MODELS USE TWO (2) AIR LINES,
WHILE 2WD MODELS USE ONLY ONE AIR LINE. (FIGURE B)
AIR SUSPENSION COMPRESSOR INSTALLATION
1.
INSTALL THE AIR LINE(S) INTO THE AIR DRYER. THE DRYER CONTAINS SELF-LOCKING COLLETS. MAKE
SURE THEY ARE INSERTED ALL THE WAY IN TO PREVENT LEAKAGE.
2.
PLUG IN THE ELECTRICAL CONNECTOR.
3.
FASTEN THE ASSEMBLY TO THE VEHICLE USING THE ORIGINAL THREE (3) MOUNTING BOLTS.
4.
REINSTALL THE WASHER RESERVOIR.
5.
TURN THE AIR SUSPENSION SWITCH TO THE ON POSITION.
6.
RECONNECT THE BATTERY CABLE.
4
P-2213
-2213
P
ARNOTT AIR SUSPENSION COMPRESSOR
1997-2006
FOR
FORD EXPEDITION/LINCOLN NAVIGATOR
FIGURE B
REV 5
22/01/2013