3D Fun Printz Universal Pen Holder 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} 3D Fun Printz Universal Pen Holder에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Fun Printz Universal Pen Holder 3 페이지.

Unscrew the cap all the off the pen holder and place to one side. Using a microfibre or soft

cloth gently wipe the threads on the pen holder and then inside the cap. Be careful when

wiping the pen holder threads as the very top threads may have slightly sharp edges. Once

you have wiped the threads apply a very small amount of oil or grease to the threads of the

pen holder only at the top of the holder. You can use a couple of drops of sewing machine

oil or general purpose grease. If nothing else is available a couple of drops of cooking oil

will work. Do not over grease. It really only needs a couple of drops. Screw the lid back on

and you should feel the mechanism is smooth again.

The photo below show an example of the amount of grease needed and where to apply the

grease.

Your feedback would be really appreciated.

I strive to provide well designed products at a reasonable cost. All feedback helps me.

Please keep your eye on my new store for new accessories coming soon