3D Global DTC133UHL 사용 설명서 - 페이지 16

{카테고리_이름} 3D Global DTC133UHL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Global DTC133UHL 18 페이지.

• Connect a suitable ext. power supply to the designated interface of the device.

• Start your system.

• If necessary, switch on the display with the "Power button" on the back.

5 Operation

• The device switches on automatically as soon as an image signal is present.

 Rear LED lights up green

• The device switches off automatically (StdBy) as soon as no image signal is present.

 Rear LED lights up red

• The device can be switched off or on with the "power button" on the rear side.

 rear LED off (resp. red or green)

Beyond that, the device does not offer any independent operating options. All content and

functions (e.g. head tracking behavior) are controlled via the corresponding external

devices.

6 Maintenance

6.1 Cleaning

• Before cleaning the device, all connection cables must be disconnected. Observe

also the instructions in paragraph 4.3 on page 15.

• Clean the screen surface and the housing only with dry or slightly damp, soft and lint-

free cloths.

• Use only a soft and lint-free cloth moistened with 70% isopropanol to disinfect the

surfaces.

• Do not use unsuitable cleaning agents, chemicals and/or unsuitable cleaning

techniques to clean the device.

Manual_DTC133UHL_EN

Rev. 1.0 / 17.11.2022

16 / 18