3D Hobby Shop ASPERA ARF 46 조립 설명서 - 페이지 14

{카테고리_이름} 3D Hobby Shop ASPERA ARF 46에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop ASPERA ARF 46 17 페이지. Radio controlled aircraft

페이지 인쇄
14
Attach motor to firewall with 3mm bolts as shown. Use included spacers between motor and firewall for
cowl clearance if needed. Most motors 140-160 grams need the spacers, most motors 170-180 grams do
not.
The cowl is mounted onto the fuselage with 4 small wood screws. These screws go into the fuselage
sides at the very front. The following procedure is helpful to be sure the wood screws are in the proper
location:
Tape small pieces of paper over the fuselage, as shown, and mark your desired hole locations on these
pieces of paper.