BLAM RELAX RA 251D 사용자 설명서 - 페이지 2

{카테고리_이름} BLAM RELAX RA 251D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BLAM RELAX RA 251D 10 페이지.

CAUTION

Thank you for using the RA 251 D amplifier, to ensure the best

performance from your amplifier, please read the Operating

Manual before using the amplifier.

Compatible with OEM head units

• High-level inputs with auto-turn on

• RCA low-level inputs: 0.3 V/15 V

• Power (4 Ω): 150 Watts RMS

• Power (2 Ω): 250 Watts RMS

• Low-pass crossover: 35 Hz — 500Hz

• Bass boost adjustable +12 dB (45 Hz)

• Signal/noise ratio: 90 dB

• Protections: short circuit / low impedance /

reversal of polarity / heat protection

• External wired remote control

• Dimensions (L x W x H ):

6.2" × 1.4" x 3.6" - 158 mm x 36 mm x 91.4 mm

POWER CONNECTIONS

Connect an empty fuse holder within 18" (45 cm) of the car battery,

and run 8 gauge (or heavier) cable from this fuse to the amplifier

location. Then connect the fuse holder to the "BATT+". Connect the

ground terminal to the closest point on the chassis of the vehicle.

Keep this ground wire to less than 39" (100 cm) in length. Ensure that

the contact surface is free of paint or rust so that the connection

between the terminal and the chassis is effective.