Cube ACID 13124 매뉴얼 - 페이지 5
{카테고리_이름} Cube ACID 13124에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cube ACID 13124 9 페이지. Grips
페이지 인쇄
EN
GENERAL INFORMATION
READ AND KEEP THESE INSTRUCTIONS IN A
SAFE PLACE
These and other enclosed instructions contain
important information on the installation,
commissioning and care of the product.
Carefully read all enclosed instructions, especially the
general safety instructions, before mounting or using
the product. Failure to follow the information in the
enclosed instructions may result in serious injury or
damage to the product itself and your vehicle. Keep the
enclosed instructions on hand for further use. If you
pass on the product or the vehicle equipped with it to a
third party, always include all associated instructions.
We at CUBE strongly recommend that you have this
product assembled by your specialist dealer.
The enclosed instructions are subject to European
legislation. If the product or vehicle is delivered outside
Europe, supplementary instructions may have to be
included by the manufacturer/importer.
EXPLANATION OF SYMBOLS
The following symbols and signal words are used in
the enclosed instructions, on the product or on the
packaging.
WARNING!
Hazard with a medium degree of risk, which may result
in death or serious injury if not avoided.
CAUTION!
Hazard with moderate degree of risk, which may result
in moderate or minor injuries if not avoided.
NOTE!
Warning of possible damage to property.
Useful additional information on assembly or
operation.
Read and follow the enclosed instructions.
Check the manufacturer's specifications and
instructions for correct installation.
Check the facts as presented.
The article number listed under the symbol is
only suitable for handlebars of the specified
XX mm
diameter.
EN
FOR FURTHER INFORMATION
Please visit us occasionally on our website
at www.CUBE.eu. There you will find news,
information and the latest versions of our
operating instructions, as well as the addresses of our
specialist dealers.
Pending System GmbH & Co. KG
Ludwig-Hüttner-Str. 5-7
95679 Waldershof
Germany
+49 (0)9231 97 007 80
www.cube.eu
The article is only suitable for bicycles with a
m i n
maximum seat height above 635 mm. (measured
from the ground to the seating surface)
The article is only suitable for bicycles with a
m a x
maximum seat height above 435 mm. (measured
from the ground to the seating surface)
Degrease the surface with alcohol and a lint-
%
free cloth.
a lc .
The article is not suitable for use on toy
scooters.
SAFETY INFORMATION FOR
ACCESSORY PARTS
WARNING!
Risk of accidents and injury!
Read all safety information and instructions. Failure to
comply with the safety information and instructions can
cause accidents, serious injuries and damage.
Safety of children
If children play with the packaging or small parts, they
can choke on them and suffocate or injure themselves.
» Keep small parts away from children.
» Do not let children play with the packaging or the
product.
» Do not leave the product and the vehicle unattended
during assembly.
Safety information for installation
» Before installation, check the delivery scope of the
product for completeness.
» Before installation, check all the components of the
product and the vehicle for damage, sharp edges
or burrs.
» If the delivery scope of the product is incomplete or
if you discover any damage, sharp edges or burrs on
the components or the vehicle, do not use it.
» Have the product and the vehicle checked by your
specialist dealer.
» Make sure that all controls (brake levers, gear le-
vers/ twist-grip shifters, etc.) can be reached without
restriction and operated safely after mounting the
product. If necessary, adjust the controls accordingly.
» Only use the intended parts and accessories for the
product. Components from other manufacturers
may impede its proper functioning.
» If you would like to combine this product with a
vehicle from another manufacturer, please check the
vehicle specifications and dimensional accuracy and
compatibility in accordance with the specifications
in the accompanying manual and instructions for
your vehicle.
» Screw connections must be properly tightened to
the correct tightening torque values using a torque
wrench.
» Check the product for a firm seat.
» If you are inexperienced in using a torque wrench or
do not own a suitable torque wrench, have the screw
connections checked by your specialist dealer.
» Observe the specific torque values for aluminium or
carbon fibre reinforced plastic (CFRP) components.
Also read and observe the relevant information in the
instruction manual for your vehicle.
Safety information for operation
Note that accessories can greatly influence the charac-
teristics of the vehicle.
» If you are not absolutely sure or if you have any ques-
tions, contact your dealer.
» The enclosed instructions cannot cover every
possible combination of the product with all vehicle
models.
Safety information for maintenance
Prevent malfunctions due to excessive wear, material
fatigue or loose screw connections:
» Check the product and your vehicle regularly.
» Do not use the product or your vehicle as a whole
if you notice excessive wear or loose screw con-
nections.
» Do not use the vehicle if you notice cracks, deforma-
tions or changes in colour.
» Have the vehicle checked immediately by your
specialist dealer if you notice excessive wear, loose
screw connections, deformations, cracks or changes
in colour.
» After a fall, all components must be checked for
damage and replaced if necessary.
CLEANING AND CARE
NOTE!
Risk of damage!
Improper handling of cleaning agents can cause
damage to the product.
Do not use aggressive cleaning agents, brushes
»
with metal or nylon bristles or sharp or metallic
cleaning objects such as knives, hard spatulas and/
or the like as they can damage the surfaces and
the product.
Clean the product regularly with water (add a mild
detergent if necessary) and a soft cleaning cloth.
STORAGE
All parts must be completely dry before storage.
• Always store the product in a dry place.
• Protect the product from direct sunlight.
DISPOSAL
Dispose of the packaging according to type. Put card-
board and carton in the waste paper collection, foil and
plastic parts in the recyclables collection.
Dispose of the product in accordance with
the laws and regulations in force in your
country.
LIABILITY FOR MATERIAL DEFECTS
If any defects should occur, contact your specialist
dealer from whom you purchased the product.
To ensure that your claim is processed smoothly, you
will have to provide proof of purchase and inspection
certificates.
Therefore, keep them in a safe place.
To ensure a long service life and durability of your
product or vehicle, it must only be used in accordance
with its intended purpose. Be sure to observe the infor-
mation in the operating instructions for your vehicle.
In addition, the assembly instructions (especially
torques for screws) and the prescribed maintenance
intervals must be observed.