Cube FC2020-P1 빠른 사용 설명서 - 페이지 15

{카테고리_이름} Cube FC2020-P1에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cube FC2020-P1 20 페이지.

페이지 인쇄

Using NON-DHCP Server/Router Network

In Non-DHCP server/router network, the static IP address must be assigned to the device each time
when adding another IP camera to the network; the default IP address of the current one must be
changed to avoid conflict.
Please make sure the Subnet of the PC's IP address and the IP camera's IP address are the same.
[Example]
The same Subnet:
IP camera IP address: 192.168.1.168
PC IP address: 192.168.1.100
Different Subnets:
IP camera IP address: 192.168.1.168
PC IP address: 192.168.2.100
To Change PC IP Address:
Control PanelNetwork ConnectionsLocal Area Connection PropertiesInternet Protocol
(TCP/IP) Properties
Please make sure your IP camera and PC have the same Subnet. If not, please change IP
camera subnet or PC IP subnet accordingly.
PC's IP address:
13