Cube FC2020-P1 빠른 사용 설명서 - 페이지 6
{카테고리_이름} Cube FC2020-P1에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cube FC2020-P1 20 페이지.
페이지 인쇄a. Please connect the G & DO pin to the external relay (buzzer) device
When no event happens, DO output is 5V (DO and GND are disconnected). When the camera
detects event happening and triggers external alarm, DO output is 0V (DO and GND are
connected).
b. Please connect the G & DI pin to the external trigger device.
If you select "N.O" in "Input sensor setting", when external devise or circuit makes DI and GND
pin connected, the camera input alarm is triggered, and then camera will execute the action
user has set, for example, send snapshot to E-mail address.
If you select "N.C" in "Input sensor setting", when external devise or circuit makes DI and GND
pin disconnected, the camera input alarm is triggered, and then camera will execute the action
user has set, for example, send snapshot to E-mail address.
4