Cube Controls Formula 사용자 설명서 - 페이지 11

{카테고리_이름} Cube Controls Formula에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cube Controls Formula 16 페이지. Wireless esports racing wheel
Cube Controls Formula에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)

페이지 인쇄

Adjusting the trimmers

Carefully place a small philips screwdriver inside the screw hole leaved by

the screw you removed in the previous step, and move it slightly until it

engages the trimmer. It sits around 10mm below the surface of the main

body.

There is one trimmer for each right (up-shift) and left (down-shift) paddles.

Press the paddle you are adjusting and keep it pressed, rotate the trimmer

slowly clockwise or anticlockwise until the down-shift button (9) or up-shift

button (10) are on.

Please notice that the adjustment trimmer have end points on both

ends, do not force the rotation if you reach them.

Release the shifter, remove the screwdriver and check if the shifter is now

working properly. If needed, please, do repeat this process for the other

paddle.

Once you are done with the calibration, put back in place the Torx screws

you removed at the beginning.