Cube Controls Formula Pro USB Drago 사용자 설명서 - 페이지 16
{카테고리_이름} Cube Controls Formula Pro USB Drago에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cube Controls Formula Pro USB Drago 19 페이지. Wireless esports racing wheel
페이지 인쇄
Adjusting the trimmers
Carefully place a small philips screwdriver inside the screw hole leaved by the screw
you removed in the previous step, and move it slightly until it engages the trimmer.
It sits around 10mm below the surface of the main body.
There is one trimmer for each right (upshift) and left (downshift) paddles.
Press the paddle you are adjusting and keep it pressed, rotate the trimmer slowly
clockwise or anticlockwise until the downshift button (9) or upshift button (10) are
on.
Please notice that the adjustment trimmer have end points on both ends, do
not force the rotation if you reach them.
Release the shifter, remove the screwdriver and check if the shifter is now working
properly. If needed, please, do repeat this process for the other paddle.
Once you are done with the calibration, put back in place the Torx screws you
removed at the beginning.