Cubert S185 하드웨어 작동 매뉴얼 - 페이지 7

{카테고리_이름} Cubert S185에 대한 하드웨어 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cubert S185 17 페이지.

1.3 Miscellaneous notes

The camera is an optical measurement device. Rapid changes in ambient conditions (temperature, air

humidity) might steam up optical elements in the camera system. These condensations may give rise

to malfunction.

In order to avoid condensed water place camera into

a closed plastic container prior exposing to high ambient

condition changes.

The camera might get hot during operation. This is normal and does not pose an incident.

By default, the focal point of the camera is set to infinity. Any change of the optics (focus,

aperture) might misalign the system. If you think you might have misaligned the optic

check your camera system.

If it does not provide satisfactory results, please contact Cubert support for re-calibration.

The "CE" sign confirms, that this product complies with European regulations for safety,

healthcare, environmental protection and operator's protection. Cameras with "CE"

symbol are destined for the European market.

This symbol indicates the separate return and recycling of electric and electronic devices

in EU-countries. Please do not dispose device to household waste. Please inform your-

self about the respective recycling regulations in your country when disposing of the

device.

This symbol indicates the separate return and recycling or batteries and rechargeable

batteries within EU. Please do not dispose of batteries or rechargeable batteries to the

household waste. Please inform yourself about the respective recycling regulations in

your country when disposing of the batteries or rechargeable batteries.

Leave camera in plastic container until the air

temperature within the container reaches the

ambient temperature.