CUBETAPE C190POS 사용자 설명서
{카테고리_이름} CUBETAPE C190POS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CUBETAPE C190POS 4 페이지. Parcel dimensioner
CUBETAPE C190POS에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 구성 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
Quick Start Guide for C190SHP,
C190POS, C190DSK – Page 1
Contents of C190SHP:
Cubetape
C190 POS
Installation:
Powering On/Off and Bluetooth Pairing:
• Power on Cubetape by pressing and holding m button for 3 seconds
Power off Cubetape by pressing and holding m button for 6 seconds
• To pair with cradle, scan the pairing barcode on the front of the cradle
• Connection is successful when the Blue LED indicators on Cubetape and
the cradle are permanently ON. If the Blue LED indicators continue to
flash, re-scan the Bluetooth pairing barcode on the cradle.
• Cubetape will remain ON while it has an active Bluetooth connection,
otherwise it will power OFF after around 3 minutes
Operations and Measuring:
Extend the tape, press the
'm' button
to scan the barcode
measurement on the tape
•
Blue LED indicators are on permanently when
connected
•
To scan a barcode ID, press 'm'
# 2018001
C190DSK
Cradle
PC
USB
Cable
Quickstart
Guide
DIP switches beneath cradle:
Cradle
CORRECT
C190CRC
USB Cable
OFF
ON
COMMS MODE
USB-VPC
USB-HID
RESERVED
--
RESERVED
--
P airing
barcode
√
www.cubetape.com
DEFAULT
ON
--
OFF
--
OFF
INCORRECT
x