3D innovations DeskCycle 사용자 설명서 - 페이지 4
{카테고리_이름} 3D innovations DeskCycle에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D innovations DeskCycle 16 페이지. Using the large display manual
3D innovations DeskCycle에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 매뉴얼 (3 페이지)
페이지 인쇄
Step 1: Install the Large Leg
•
Remove the nuts and washers from the Large Leg.
•
Align the bolts of the Large Leg with the holes in the
Bike, and push the bolts through the holes.
•
Attach a Washer and a Nut to each bolt.
Do NOT tighten the nuts until step 3.
Step 2: Install the Small Leg
•
Remove the nuts and washers from the Small Leg.
•
Align the bolts of the Small Leg with the holes in the
Bike, and push the bolts through the holes.
•
Attach a Washer and a Nut to each bolt.
Do NOT tighten the nuts until step 3.
2