Discovery Telecom 47019 사용 설명서 - 페이지 4

{카테고리_이름} Discovery Telecom 47019에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Discovery Telecom 47019 10 페이지.

poWering and adJUsting settings

for the WireLess reMote sensor

Remove the protective plastic fi lm from the LCD. Remove the two

small screws from the rear door of the sensor with a small Phillips head

screwdriver. Insert two AAA batteries (user supplied) according to the

polarity as indicated on the sensor. Set the switch (on the right side)

to 1 (for Channel 1), push/toggle the center switch so readings will

be shown in "C" (Centigrade) or "F" (Fahrenheit). Next, push the left

switch "TX" which will transmit the RF signal from the sensor to the

Receiver. The Sensor itself will display the outside temperature.

The Sensor should be mounted in an open area and can maintain

communication with the Receiver from a distance of up to 100 feet (20

meters). The Sensor is built to securely mount to any surface.

If the Sensor's battery power becomes low, a "low battery icon" will

appear on the LCD display. Change the batteries to ensure a strong

signal is being sent to the Receiver.