3D innovations MagneTrainer 소유자 매뉴얼 - 페이지 8

{카테고리_이름} 3D innovations MagneTrainer에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D innovations MagneTrainer 12 페이지. Extended range

페이지 인쇄

Using the Display

How to Read the Display

There are two numbers displayed on the

monitor, one on the top and one on the bottom.

Top Number:

The top number always displays your pedal

speed, in miles per hour.

Bottom Number:

The bottom number can display Distance,

Calories or Time.

The Function Button

Press this button to change what is displayed by

the bottom number. Each time you press the

Function Button the Indicator Arrow moves

between,



TIME (total Time pedaled),



DIST (total Distance pedaled, in miles),



CAL (total Calories burned),



SCAN.

The Indicator Arrow points to the function that is being displayed. For example, in the picture

the Indicator Arrow is pointing to DIST, so the lower number displays the total distance

pedaled.

What is SCAN?

When SCAN is selected, the lower number will cycle between displaying Time, Distance and

Calories. Each will be displayed for about 6 seconds. Another Indicator Arrow will point to the

function (Time, Distance or Calories) that is being displayed.

How to Reset Total Time, Total Distance and Calories

Time, Distance and Calories are accumulated as you pedal. To reset these all to zero, press

and hold the Function Button for at least 3 seconds.

How to Turn the Display On and Off

The display turns on automatically when you pedal the bike. You can also turn the display on

by pressing the Function Button. You do not need to turn the display off. It will turn off

automatically a few minutes after you stop pedaling.

Are the Calories on the Display Accurate?

Only if the pedal resistance is at maximum. All mini exercise bikes (and many full-sized bikes)

do not measure the power put into the bike. Measuring power is very expensive, but it is

needed for a reasonable calculation.

How to Get Accurate Calorie Counts

We've created a free Calorie Calculator (see the section Free Software) which solves this

problem. It uses your gender, height, weight, age, pedal speed and the MagneTrainer knob

setting to calculate calories burned. It also calculates the wattage of the bike from the

resistance knob position and your pedal speed. See the section Free Software for more

information.