3D innovations DeskCycle 소유자 매뉴얼 - 페이지 5

{카테고리_이름} 3D innovations DeskCycle에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D innovations DeskCycle 12 페이지. Using the large display manual
3D innovations DeskCycle에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 매뉴얼 (3 페이지)

페이지 인쇄

Step 3: Level the Bike

At this point the four nuts that

attach the legs to the bike should

be loose.

Place the Bike onto a smooth flat

surface, like a kitchen floor.

Tighten the four leg nuts using the

supplied Tool.

Step 4: Install the Pedals

IMPORTANT!

If you plan to pedal the

DeskCycle backwards you will

need to apply the Blue

Threadlocker to the pedal

threads before installing them!

See the section Using

Threadlocker on the Pedal

Threads for more details.

Tighten the pedals well using the

tool! Using the bike with loose

pedals will damage the pedal arm

threads.

Screw the left pedal

into the left pedal arm

COUNTER-CLOCKWISE.

Screw the right pedal

into the right pedal

arm

CLOCKWISE

Step 5: Install the LCD

Display

Plug the Connector into the Display.

Then carefully slide the Display onto

the Display Bracket.