Cubii JR1 빠른 시작 매뉴얼
{카테고리_이름} Cubii JR1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cubii JR1 2 페이지.
페이지 인쇄
Using Your Cubii JR1
Follow the guidelines below to enhance your experience
ADJUSTING THE RESISTANCE
Cubii JR1 comes with 8 resistance levels,
adjust your workout intensity by turning
the resistance control knob. Level 1 is the
lowest intensity and level 8 is the highest.
We recommend you begin at Level 1
and increase the intensity gradually over time.
SECURING YOUR CHAIR
If you are sitting on an office chair with wheels, you are encouraged
to use the chair wheel stoppers. Place stoppers on the front casters to
prevent your chair from moving backwards when you pedal.
FINDING YOUR COMFORT ZONE
Find the seat configuration that suits you most. If you feel there is not
enough room between your knees and the desk, push your Cubii JR1
away from you and lower the chair height. Keep your back straight,
and do not slouch.
CONTACT
GETTING YOUR GROOVE
1-844-282-4401
cubii.com/support
You can use your Cubii JR1 in short intervals throughout the day, or you
can use it for long periods of time. We recommend that you begin with
a five minute session, see how your body feels afterwards, and increase
your session length gradually over time. You can also go forwards or
backwards on the Cubii JR1 to work different muscle groups.
Please Note:
Cubii JR1 is only to be used while sitting. Do not stand on the unit.
TRACKING YOUR WORKOUT
You can track your workout using the LCD screen.
It tracks the below
stats:
1. Stride (0-9999)
2. Calorie (0-999.9 kcal)
3. Distance (0-999.9 mi or km)
4. Time (0:00-99:59 hour:min)
5. RPM (0-999 strides/min)
DISPLAY MONITOR SETTINGS
•
Press the silver button to switch between stats.
•
Select scan to alternate automatically.
•
Screen turns on when the silver button is pressed or
when you start pedaling.
•
Screen turns off after 4 minutes of inactivity.
•
To reset stats, press and hold the silver button until all segments
turn black (about 3 seconds), then let go. Replacing the battery will
also reset the stats. When the stats reach maximum values, they will
reset to zero.
•
To switch from Miles(M) to Kilometers(K), press and hold the
silver button for at least 6 seconds. All segments will turn black twice
during this time. After the second flash of black segments, release
the button. When displaying distance, you will see the M is now
showing a K, or vice versa.
Find detailed product manual, assembly demo,
and warranty details at cubii.com/support
Quick Start Guide
R3