ACOUSENCE dac-pre MKII 사용자 설명서 - 페이지 5

{카테고리_이름} ACOUSENCE dac-pre MKII에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACOUSENCE dac-pre MKII 17 페이지. Da converter / preamplifier

Power connection

This device is designed to be operated from a protective earth socket. Please connect

the device to an appropriately grounded socket using the enclosed power cord. The

power supply required for the main unit can be found on the label. Power cords must

be routed so that there is no risk of damage (e.g., from foot traffic or furniture). Special

care must be taken at the connection points. Do not apply excessive force to the

power plug.

There is a pushbutton switch on the front panel with which the unit is switched on.

However, the main switch on the rear of the device in the IEC terminal must also be

observed. This must be set to I to operate the device. The LED next to the pushbutton

switch on the front panel signals this standby mode. Only when the main switch is in

the position O, the device will be completely de-energized. If the device is not used for

a longer period, the main plug should be pulled out of the socket.