CubiScan 75-C 빠른 참조 매뉴얼
{카테고리_이름} CubiScan 75-C에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CubiScan 75-C 2 페이지.
페이지 인쇄
CUBISCAN 75-C OPERATION
QUICK REFERENCE GUIDE
This quick reference guide provides an overview and instructions for operating the Cubiscan
75-C. For more detailed instructions, see the Cubiscan 75-C Operations and Technical Manual.
SUMMARY
The Cubiscan 75-C is a stationary dimensioning system that uses
3D cameras to measure objects. The simple overhead design
grants access from almost any direction. There are no moving
parts, allowing for effortless setup and use.
Any scale with a TCP/IP or serial output can work with the
Cubiscan 75-C, creating a complete cubing and weighing
system. Measurements are taken by placing an object on the
scale (if a scale is being used), scanning a barcode, tapping the
Measure button, or placing an object in the measurement area.
DISPLAY OVERVIEW
Buttons/Indicators
L, W, H
Dwgt
Measure (button)
Ready (indicator)
Tare (indicator)
Display window
Dim weight factor
Measure status
Connection status
Meaning
These display the measured dimensions in inches or centimeters.
This displays the dimensional weight of an item in pounds or kilograms.
(L x W x H)/dim weight factor.
Tap this button to initiate a measurement.
This indicates if the Cubiscan 75-C is ready to measure.
This indicates if a scale tare is being used to calculate the height.
This displays a color-depth image using a color scale to indicate the
height of the object. A live-feed view option is also available.
This is the factor used to calculate the dim weight. A common domestic
factor is 166. A common international factor is 139.
This displays the current status of the 3D measurement sensors and
various error messages.
This displays the current status of the TCP/IP connection.