Aroma ADF-189 사용 설명서 - 페이지 6
{카테고리_이름} Aroma ADF-189에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aroma ADF-189 15 페이지. Stainless steel deep fryer
Aroma ADF-189에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지)
페이지 인쇄
Before First Use:
1. Read all instructions and important safeguards.
2. Remove all packaging materials and make sure items are received in good condition.
3. Tear up and discard all plastic bags as they can pose a risk to children.
4. Wash accessories and inner pot in warm soapy water. Rinse and dry thoroughly. The
heating element can be immersed in water, but never immerse the electrical unit. Dry
the heating element thoroughly before use.
5. Wipe the body clean with a damp cloth.
6. Place the deep fryer on a level, stable surface.
Ø Do not use abrasive cleaners or scouring pads.
Ø Do not immerse the appliance in water at any time.
Oil Selection:
1. We recommend the following oils for healthier deep-frying: corn, canola or blended
vegetable oil. These oils are cholesterol-free and low in saturated fat.
2. We do not recommend using peanut oil, soy oil, sun flower oil or lard that may drip and
deteriorate quickly when heated. Heavy flavored oil such as olive oil should also be
avoided.
3. We do not recommend mixing old and new oil together as this spoils new oil quicker.
4. The number of times that the frying oil can be reused depends on the food that is fried
in it. For example, when food such as coated fish battered with bread or cracker
crumbs is fried frequently, the oil will need to be replaced more often.
Preheat Oil:
1. Turn the temperature control to the lowest temperature and make sure that the fryer is
unplugged.
2. Wipe dry the non-stick frying pot and fill it with oil no higher than the MAX level and no
lower than MIN level.
3. Be sure oil level is no higher then the MAX line marked on the pot. Oil level must
always be between the minimum and maximum line marks.
4. Plug the fryer into a wall-outlet and turn on the power using the power switch. The
power switch will illuminate and the indicator light will turn ON.
5. Close the lid tightly.
6. Set the temperature control to the desired degree and the fryer will start heating oil.
7. When the oil reaches the desired temperature, the indicator light will turn OFF.
HOW TO USE
4