CubuSynth Dual CS-20 VCF 빌드 매뉴얼 - 페이지 5
{카테고리_이름} CubuSynth Dual CS-20 VCF에 대한 빌드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CubuSynth Dual CS-20 VCF 16 페이지. Dual / stereo multimode vcf with self-oscillating resonance and intuitive routing and cv modulation matrix
CubuSynth Dual CS-20 VCF에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지)
페이지 인쇄CubuSynth Dual CS-20 VCF - Build Guide
STEP 4 (Main PCB)
IC sockets
4
IC-Socket 14pin
3
IC-Socket 16pin
Look for the dip-14 and dip-16 sockets.
Oriantation is important to know how to place the ICs later!
The place for the notch is marked on the PCB with a "D
shape", in this Picture marked red for clarification.
You can use tape to hold them in place, put the other PCB
on top or bend 2 pins of each socket inwards, so they don't
fall when turning the board around. Then solder
everything.
STEP 5 (Main PCB)
100nf ceramic capacitors
14
100n
Find the 100nf ceramic capacitors
They are marked as "104"
Orientation doesn't matter. Put them in place and bend the solder legs outwards, so they don't
fall when turning around the board.
Solder all of them in place. On the next page you can see the placement of the 100n capacitors
Page 5
U3,U6,U8,U9
U5,U2,U1
C24,C23,C22,C21,C20,C19,C18,C17,C16,C15,C14,C13,C12,C11
PCB V1.4 Mar 2023