Aroma Professional AWK-170D 사용 설명서 - 페이지 4
{카테고리_이름} Aroma Professional AWK-170D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aroma Professional AWK-170D 7 페이지. Digital glass kettle
페이지 인쇄
Before First Use
1. Read all instructions and important safeguards.
2. Remove all packaging materials and check that
all items have been received in good condition.
3. Tear up all plastic bags and dispose of them
properly as they can pose a risk to children.
4. Clean the interior of the kettle with a soft sponge
and warm, soapy water. If your hand will not fit
inside the kettle, swish warm, soapy water around
in the interior of the kettle with the kettle lid on.
Take care to keep the electrical components on
the exterior of the kettle dry.
5. Rinse and drain any remaining soapy water from
the kettle.
6. With a damp cloth, gently wipe the exterior of the
kettle. Do not wipe electrical components as this
may cause damage to the unit.
7. Dry the interior and exterior of the kettle
thoroughly before placing the kettle onto the
power base.
8. Following the instructions in "Heating Water" on
pages 7-8, boil 7 cups of water. Once the water
has boiled, pour it out then rinse the inside of the
kettle once more with warm water. The kettle is
now ready for use.
To Clean
1. Clean the interior of the kettle with a soft sponge
and warm, soapy water. If your hand will not fit
inside the kettle, swish warm, soapy water around
in the interior of the kettle with the kettle lid on.
2. Rinse and drain any remaining soapy water from
the kettle.
3. With a damp cloth, gently wipe the exterior of the
kettle. Do not wipe electrical components as this
may cause damage to the unit.
4. Dry the interior and exterior of the kettle
thoroughly before placing it back onto the power
base.
6.
The water is boiling, but the kettle does not turn
off.
·
Caution:
Never attempt to
disassemble the kettle or
The kettle will not turn on.
the power base.
·
Always take care not
to allow electrical
components to come
into contact with water.
Never immerse the
kettle, power cord, plug
or power base in water.
Do not use abrasive
There are mineral deposits on the interior of
cleaners or scouring
the kettle.
pads of any kind on the
kettle or power base.
·
This will cause damage
to the finish and may
create a risk of electrical
shock.
If the kettle is heated with no water inside, the
Always unplug the
internal safety mechanism will automatically
kettle and allow it to
cool completely before
turn the kettle off.
cleaning.
·
1. Place the power base on a sturdy, level and dry
2. Open the kettle lid using the lid release button and
3. Close the lid ensuring it locks into place.
4. Make sure the bottom of the kettle is completely
5. Plug the power cord into an available 120V AC wall
6. Press ( ) to turn the kettle on.
Troubleshooting
The auto shut-off function will not operate
properly if the lid is not completely closed.
Allow the kettle to cool, then check to see that
the lid is properly locked into place.
Make sure that the kettle is seated properly
on the power base and that the base is
connected to a functioning electrical outlet.
Water or debris on the bottom of the kettle
or on the power base may interfere with the
functioning of the kettle. Be sure that the
base of the kettle and the power base are
dry and free of debris.
A certain amount of scale build-up is
normal after use and is caused by minerals
contained in hard water. To remove deposits,
refer to "Mineral Deposits" on page 8.
Remove the kettle from the power base and
fill with at least 2 cups of water then return to
the power base. The kettle will begin working
again once the internal temperature has
dropped to a safe level.
Heating Water
surface.
fill with water. Water must be filled between the
MIN and MAX levels.
dry then place the kettle onto the power base.
outlet.
continued on next page>>
Note:
· If the problem persists,
please contact our
customer service
department at 1-800-
276-6286 or by email
at CustomerService@
AromaCo.com.
7.