Dish Network DISH 500 매뉴얼 - 페이지 12

{카테고리_이름} Dish Network DISH 500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish Network DISH 500 18 페이지.
Dish Network DISH 500에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)

페이지 인쇄
Dish Network DISH 500 매뉴얼
1000.4 Dish - Assembly, Pointing, and Peaking
Rotate the cam clockwise until the highest possible signal is reached, repeat rotations if necessary.
о
IMPORTANT: Do not tighten the azimuth fine-tune cam.
о
1.
Tighten the three azimuth plate bolts labeled with a 'T' and reconfirm signal using the push pull method.
Complete Assembly
1.
Connect the receiver cable(s) to the DPP 1000.4 LNBF PORT 1 (and PORT 2 and PORT 3, as necessary).
2.
Run Check Switch test and confirm 61.5°W, 72.7°W, and 77°W reception.
3.
Take a software download, if you didn't already.
4.
Run a second Check Switch test and confirm 61.5ºW, 72.7ºW, and 77° reception.
5.
Install additional receiver(s), if necessary.
6.
If applicable, connect a second satellite dish to the DPP 1000.4 LNBF's LNB IN port.
2-8d