Dish Network DISH 500H 매뉴얼 - 페이지 13
{카테고리_이름} Dish Network DISH 500H에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish Network DISH 500H 18 페이지.
Dish Network DISH 500H에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)
페이지 인쇄
DISH 500+ and DISH 1000+
•
DISH 500+ views 110°, 118.7°, and 119°. DISH 1000+ views 110°, 118.7°, 119°,
and 129°. The dish antennas are the same.
•
The DP 500+ LNBF Assembly includes two LNBFs. One LNBF receives signal
from 118.7° and 119°, while 110° is received from the attached DP Dual or Single
LNBF. Use a DP Plus 33, DP34, or DP Plus 44 Switch with the DISH 500+.
•
DISH 1000+ uses a DP 500+ LNBF Assembly with a DISH 1000+ upgrade kit,
which is a bracket to attach a DP Dual or DP Single for reception of 129°. Use a
DP Plus 44 Switch with the DISH 1000+.
•
Peak using 119° (P
signal on 110° (and 129°, for DISH 1000+).
•
The following Legacy receivers do not have 118.7° software support: Models 1000,
3000, 4000, 5000, JVC-DVHS (IRR), and DishPlayer 7100/7200.
•
Refer to DISH 500+ Repoint Kit for SuperDISH Type I for information on repointing
a Type I SuperDISH to function as a DISH 500+ or DISH 1000+.
•
Struts are required.
•
Antenna dimensions: 30.9"W x 23.8"H.
Dish Antennas - DISH 500+ and DISH 1000+
2D). Maximize the signal on 118.7° (P
ORT
1F), then verify
ORT
DP 500+ LNBF Assy. DP 1000+ LNBF Assy.
DISH 500+
DISH 1000+
2 - 9