Dish Network DP Quad LNBF 설치 빠른 참조 매뉴얼 - 페이지 5

{카테고리_이름} Dish Network DP Quad LNBF에 대한 설치 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish Network DP Quad LNBF 6 페이지.

페이지 인쇄

DISH Pro & DISH Pro Plus Installation Considerations

LNBFs AND SWITCHES

• DISH Pro LNBFs work with DISH Pro Plus switches. The DISH Pro Plus Twin functions the same as a

DISH Pro Twin LNBF when connected to any DISH Pro Plus switch.

• Cannot connect DISH Pro Plus Twin to DISH Pro 34/DISH Pro 21 switch.

• DISH Pro Plus 44: 119°/110° on first (top) two ports.

• Legacy LNBFs and switches can never be used with DISH Pro or DISH Pro Plus LNBFs and switches.

• The maximum recommended cable length is 200 feet from the LNBFs to the furthest DISH Pro or DISH

Pro Plus receiver; 150 feet for Legacy receivers.

• When mounting switches, position according to instructions on the label.

• Use drip loops to direct water away from F-connectors.

LEGACY RECEIVER INSTALLATIONS

• The DISH Pro Adapter must be used to connect any Legacy satellite receivers to a DISH Pro LNBF or

Switch.

o Legacy Receivers include:

Models 1000, 2000, 3000, 4000, 5000, 6000, 2700, 2800, 3700, 3800/3900, 4700/4900

DISHPlayer Models 7100, 7200

All OEM-equivalent models (e.g. RCA, JVC, Phillips)

• The DISH Pro Adapter is NOT needed when a Legacy receiver is directly connected to a DISH Pro

Plus LNBF or Switch.

1000, 2000, 3000, 4000, 5000, JVC DVHS IRR, and DISHPlayer 7100/7200 model receivers do not

support 4 orbital location installations or reception from the 105°, 121°, and 129° orbital locations.

DISH PRO PLUS (DP PLUS) RECEIVERS

DP Plus receivers can be connected with a single cable to DP Plus switches or LNBFs when used with a

DP Plus Separator.

See the "Receiver LNBF/Switch Compatibility Chart" for details.

SINGLE-CABLE, DUAL-TUNER INSTALLATIONS

• Three DISH Pro Plus components must be connected together for this type of installation:

o DISH Pro Plus LNBF or Switch

o DISH Pro Plus Separator

o DISH Pro Plus (dual-tuner) Receiver

• Two single-tuner receivers cannot be connected to a DP Plus Separator – they are not DISH Pro Plus

receivers.

INSTALLATION MATERIALS

Materials used in a DISH Pro or DISH Pro Plus installation must be rated to 2150 MHz and pass DiSEqC

22 KHz tone.

These materials include:

•

RG-6 cable

•

Ground blocks

•

Diplexers

•

Splitters

•

Line amps

•

Barrel connectors

•

Wall plates

•

Surge protectors

DISH Network Retailers, please refer to the latest "DISH Pro/DP Plus Compatible Accessories List"

located on the Retailer Care Site.

FOR MORE INFORMATION (available on the Retailer Care Site):

• "Quick Facts" and "Installation Considerations" documents for:

o DISH Pro Plus Technology

o DISH Pro Plus 44 Switch

o DISH Pro Plus Twin

o DISH Pro Plus Separator

o Single-Cable, Dual-Tuner Installations

• Installation Guides

• Distribution Diagrams

Rev. 08/23/05