Dish Network Wireless Joey 빠른 시작 매뉴얼
{카테고리_이름} Dish Network Wireless Joey에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish Network Wireless Joey 2 페이지. Setting up your replacement receiver
Dish Network Wireless Joey에 대해서도 마찬가지입니다: 설정 매뉴얼 (16 페이지), 활성화 및 설정 매뉴얼 (2 페이지)
페이지 인쇄
SETTING UP YOUR
REPLACEMENT RECEIVER
Be sure to read these instructions before
disconnecting any cables from your original receiver.
1.
Move Cables to Your Replacement Receiver
a. Stacking Method
Use this method if you are able to place your replacement receiver
next to your original receiver and you can access and see the back of
both receivers. One by one, disconnect each cable from your original
receiver and connect it to the same port on your replacement
receiver. Once you have connected all the cables, skip to
Original Receiver
Your wiring set up may be different.
DN005773
b. Diagram Method
If you can't use the stacking method, disconnect the cable(s) from
the back of your original receiver and use the following diagram to
reconnect the cable(s) to your replacement receiver. Try to only
disconnect cables from your original receiver, and not from the point
where the cables connect to the TV, or other components.
i.
Connect the
HDMI cable
from the TV to
your receiver.
Step
2.
Replacement Receiver
Connect the
Composite
RCA cables
from the TV to
your receiver.
ii.
Connect the
replacement
Power adapter.
iii.
Plug your
receiver into
a wall outlet.
OR