Dish TV DVB-S6800PLUS 운영 매뉴얼 - 페이지 10

{카테고리_이름} Dish TV DVB-S6800PLUS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish TV DVB-S6800PLUS 20 페이지. Digital satellite receiver

INSTALLATION

On the Main Menu, drive the cursor onto the third

instruction

Press the OK key to enter its submenu.

Drive the cursor onto the first instruction; press the

OK key to enter its submenu

Put the cursor onto the first instruction Satellite Name,

press the </> key to alternate the satellite or, press the

OK key to show the table including all the preinstalled

satellite on the right side, punch the

highlight one item, punch the

Put

the

cursor

Longitude(x10), input the digit by pressing the

digit-keys directly to modify

Respectively, highlight the instructions of LNB Freq1

and LNB Freq2, punch the

the parameter or, punch the digit-keys to input the

value directly. The accurate values of LNB Freq1 and

LNB Freq2 refer to the values indicating on the LNB

of the using antenna

E.g, if the parameter value of Local Oscillation (i.e.,

L.O.) on the LNB is indicating as 5.15GHz, then [LNB

Freq1] and [LNB Freq2] should be both set as 5150; if

the parameter value of Local Oscillation (i.e., L.O.) on

the LNB is indicating as 11.3GHz, then [LNB Freq1]

and [LNB Freq2] should be both set as 11300.

Highlight the instruction LNB Power, punch the </> key

to switch the state, normally, keep the state of it on the

Auto, however,

On the picture that the single machine is being

used, keep the status of the LNB Power on the

Auto

On the other picture that the loop connection is

key to opt

onto

the

second

, </> key to a lternate

, </> key to

instruction