3D Robotics IRIS 매뉴얼
{카테고리_이름} 3D Robotics IRIS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Robotics IRIS 5 페이지. Tarot gimbal
페이지 인쇄TAROT GIMBAL
1 Attach tall legs
IRIS' four tall legs allow for a safe landing with the gimbal. Attach the two
black legs to IRIS' black arms and the two blue legs to IRIS' blue arms.
1
Turn IRIS upside down, and set the leg into the notches on the bottom of
the arm. Orient the leg near the motor and with the point in the leg facing
towards the body of IRIS as shown below.
2
Add the clip onto the bolt with the notch hooked into
the notch in the arm.
Tarot brushless gimbal with
mounting plate
Two mounting screws
Four tall legs with mounting clips, bolts,
and nuts